Read the Incept Blog

*** TENDERS ** SPECIAL ***

STOWAWAY TENDERS:      2009 - 2010

 

Export-Quality construction         Exceptional performance

Quality Finish           Full Factory Backup         5-Year Warranty

 

           

 

Incept NZ builds some 2,000 marine boats and boat sponsons per year for other manufacturers and exporters.
 
This job lot of Incept Stowaway inflatable-keel tenders is being offered factory-direct as a
once-only production to use available stock componentry.
 
Keel tenders have always been the most popular models in our yacht tender ranges. They track and all-round perform much better than flat bottom boats. All tenders were built in New Zealand at Incept's modern Taihape factory to deluxe specifications and exacting quality assurance. The boats are approximately 40% discounted from normal sell price and are being offered on a first served basis. 
 
Prices are ex-factory in NZ$ and include GST.

Download a brochure of the Incept Stowaway Yacht Tenders in PDF.

 

S24K

These inflatable-keel tenders are 2.4m long, and are fitted with air-deck floors and keels to give outstanding performance with small motors yet still allow the boat to be rolled up easily. Takes 5 - 6 HP standard shaft motor. Good stability, excellent turning.
Weighs 28 kg. White with grey accessories and blue stripe or Yellow with black accessories and dark blue stripe.
   

 

 White

 

 

 

 

NZ$ 1,426

incl gst

  
S26K
 
Inflatable-keel tenders are 2.6m long, and fitted with air-deck floors and keels to give outstanding performance with small motors yet still allow the boat to be rolled up easily. Takes up to 8 HP standard shaft motor. Good stability, excellent turning.
Weighs 30 kg. White with grey accessories and blue stripe or Yellow with black accessories and dark blue stripe.

 
 

 

 

 White

 

 

 

NZ$ 1,518

incl gst

  

Specification S24K / S26K
Length S24K 2.40 m / 8' 0"   Load, S24K 300 kg / 660 lbs
Length S26K 2.60 m / 8' 8"   Load, S26K 330 kg / 730 lbs
Beam 1.50 m / 5' 0"   Crew 3 - 4
Tube 40 cm / 16"   Materials Erez Boat Pvc
Internal Beam 70 cm / 28"  

Towing rings

 3
Air Chambers 4   Weight set up 28 kg / 62 lbs
Motor Rating 4 kW / 5 HP   Size Packed 150 L / 5 c.ft

 

  • These boats are built from the best boat-quality PVC of very many we have used, made for Incept in Israel.
  • Construction of the inflatable tubes is 100% welded - no glue is used.
  • The material is high-end industry-standard 1080 gm/s.m reinforced with 1100 dtex polyester.
  • The transom is 25mm hardwood marine ply with a clear epoxy finish.
  • Seat is powder coated aluminium.
  • Oars are collapsible (2-piece) and have anodised aluminium shafts and robust polyethylene blades.
  • Pump included, dual-pressure foot bellows to achieve the high floor pressures offered.
  • Carry bag included.
  • Handles and towing rings are standard.
  • Repair kit included.
  • Standard Incept five year back-to-base warranty.
 

Copyright 2012 Incept Marine Ltd

Incept Marine Ltd. , 126 Hautapu Street, P. O. Box 26, Taihape, New Zealand
Telephone +64 6 388 0729    Fax +64 6 388 0747
Email sales@incept.co.nz   Website www.incept.co.nz  North America Website www.inceptmarine.com
 

Last Updated January 25, 2012

Site Map

Links

Web Services by Ron Castle Webs